3pcs Cutter Teeth Dental Blocks Drill CADCAM Milling Bur Tool Compatible with 3m Espe Lava Machine | Красота и здоровье

3pcs Cutter Teeth Dental Blocks Drill CADCAM Milling Bur Tool Compatible with 3m Espe Lava Machine | Красота и здоровье

3pcs Cutter Teeth Dental Blocks Drill CADCAM Milling Bur Tool Compatible with 3m Espe Lava Milling Machine           [Product Feature:]

•  
• DLC coated, this is the most commonly used type, it can be used on zirconium and wax .
  as our experience, one DLC bur assembled on Dentium system to mill Upcerama block can finish 90 to 130 teeth


•  DC coated, it is the most durable type, special for zirconium. it is not suitable for PMMA or WAX .  with DC Coating , the life is 7 to 10 times than DLC layer. it can mill 800 to 1100 teeths.  


• CrN coated, special for PMMA and WAX, its cutting surface usually come out very smooth


• Used for coarse abrasion on gold and other precious metals , leaving a smooth surface on acrylics. This reduces rework


• You can choose each size you need.
•  
•  

• DC coating is more durable than DLC, DC coating is harder than DLC, head diameter ≤ 1mm
   Too hard and too fine, if used incorrectly easy to break.
•  So we do not recommend the choice of head diameter ≤ 1mm DC coating. Too thin too hard to break easily;   ≤ 1mm,we recommended DLC coating, DLC coating hardness is not so high, so the normal use is not easy to break.
• If you are a dental technician often use it will understand this principle.