20A LCD 12V/24V Solar Panel Charge Battery Controller Regulator Auto Switch + 1Pair M/F Y Branch Connector Cable Wires | Обустройство

20A LCD 12V/24V Solar Panel Charge Battery Controller Regulator Auto Switch + 1Pair M/F Y Branch Connector Cable Wires | Обустройство

Feature:

1. over-load protection                   

2. short circuit protection                                         

3. protection from the lightning strike

4. under-voltage protection                 

5. over-charging protection

6. reverse polarity protection

Installation Instructions:

Open the top cover of controller and connect the wire with terminals as the diagram on the top cover of it.

1.Connect the "+","-" poles of the battery to the corresponding ports of controller (the third and the fourth one from left).

2.Connect the "+","-" poles of the solar pannel to the corresponding ports of controller (the first and the second one from left).

3.Connect the "+","-" poles of the load to the corresponding ports of controller (the fifth and the sixth one from left).

Note: If there is connection error, it may damage your controller.

Specification:

Rated charge current: 20A

Rated discharge current: 20A

Over load, short circuit protection: 1.5 times by the rated current

Short circuit recovery time: 10s

Open circuit voltage of solar panel: 55V

No load loss:0.05W

Over voltage protection:15V, 24V

Float charge voltage:  14V,24V

Discharge recovery voltage : 12V,24V

Over discharge voltage: 10.5V,24V

Control mode: software intelligent control

Working temperature: -35 ~ +55°C

Dimension:  (L*W*H)95.1 x 102.5 x 38.5(mm)

Feature of Y Type MC4 Solar Panel Cable Connectors:
-1 Pair of Y Type MC4 Solar Panel Cable Connectors：one female to double male (F/M/M)  and one male to double female (M/F/F)
-It can be used in harsh environment
-Compatible Mc4
-Double seal rings for better waterproof effect
-Compatible with PV cables with different insulation diameters
-It can be used in harsh environment
-With excellent aging resistance and UV endurance
-Created seal, design of dust proof
-Load capability with big current and high voltage
-Quick & simple assembly processing and simple removal of plugs without the aid of any extra instrument
-Strong pulling force capability
-Resistance of extra high & low temperature and fireproof
-Lower contact resistance.

Specification:
-Cable specification: 4mm2(AWG12)
-Rated Current: 30A
-Rated voltage: 1000VDC
-Contact resistance: ≤0.2mmΩ
-Waterproof degree：IP67  
-Flame class: UL94-VO
-Safety Class: Ⅱ
-Withdrawal force: ≥50N
-Insertion force: ≤50N
-Insulation material:  PPO + PA
-Connecting system: crimping connection
-Temperature range:  -40 ℃ ~ +90 ℃
-Cable length: 31cm(approx.)

Package included:

1x Solar charge controller

1x English User manual

1 Pair of Y Type MC4 Solar Panel cable Connectors(one Male & one female)