Cumulative type counter DC 5V Magnetic Induction Digital Counter for Punch Punch/Theft Device/Automatic doors etc | Инструменты

Cumulative type counter DC 5V Magnetic Induction Digital Counter for Punch Punch/Theft Device/Automatic doors etc | Инструменты

Cumulative type counter DC 5V Magnetic Induction Digital Counter for Punch Punch/Theft Device/Automatic doors etc

Technical parameters:

• Input pulse signal: open NPN / PNP collector contact switches, non-contact switch, limit switch, level pulse and so on.
• Input signal voltage: High level H = 4 ~ 30V, low level L = 0 ~ 0.6V, falling edge trigger
• Measuring Counting range: 0 to 9999 cumulative count
• Count input frequency: less than 2000Hz
• Display: 0.56"high brightness LED
• Working Power supply: DC 5V ± 10%; < 80mA
• Working temperature: -10 ° c ~ 60 ° c (relative humidity of 80% or less)
• Dimensions: 79 × 43 × 25mm
• Mounting Hole Size: 75 × 39.5mm

Using:

• The magnet close to the magnetic proximity switch about 0.5-1 cm, then the magnet away from the magnetic proximity switch
• for a certain distance (typically 3-5 cm or more). Then start counting.

Note:

• 1, the count signal and reset signal input switching should closer to the counter terminal.
• 2, to avoid unnecessary interference, if necessary, please use shielded cable, shield connected to the count terminal "+".
• 3, recommended to use magnetic switch

Package include:

• 1 x  Digital counter
• 1 x  Magnetic Induction Switch
• 1 x  Magnet